Keurig Not Pumping Water

Keurig Not Pumping Water: 7 Common Problems & Fix Solutions

Keurig not pumping water – You are not alone if you are experiencing problems with your Keurig coffee maker not pumping water. Numerous consumers have encountered this problem and successfully fixed it with the help of Keurig’s customer service staff and troubleshooting. 

Air bubbles in the water tank or reservoir are the most frequent causes, or some other reasons will appear in the article below. Follow CentralParkwestcafe to find a solution for this case.

What is keurig

About the Keurig coffee machine

Keurig is a beverage brewing device for both home and commercial use. The American firm Keurig Dr. Pepper is in charge of making the machines. K-Cup pods, single-serve coffee canisters, additional beverage pods, and the specialized equipment that employ these capsules to prepare drinks are the core Keurig items.

There are many different beverages you may make with a Keurig, including hot and cold coffee, tea, chocolate, dairy drinks, lemonades, cider, and fruit-based drinks. 

Keurig offers more than 400 distinct coffee and beverage variants under its own trademarks and those licensed via partnerships, in addition to more than 60 additional brands. It also contains Vue, K-Carafe, and K-Mug pods in addition to K-Cup pods.

Keurig not pumping water

If your Keurig has ever stopped working such as not pumping water, you are familiar with how it feels.

When you click the button to start the Keurig, you just hear some kind of grinding noise as the pump tries but fails to push the water through. Your Keurig has an issue that you’d want to be able to address immediately unless it’s spanking new and you can return it. 

A Keurig coffee maker will function reliably for around five years. This depends on how you utilize and maintain it. The price of the new pump is different for each model of Keurig coffee machine. It may be more cost-effective for you to simply buy a new Keurig in many instances.

If your device is still under warranty, there’s nothing to argue about. However, if you have used it for more than 5 years, you should consider replacing the water pump with a new one.

In other cases, see the following causes and our suggested solutions below!

Top reasons why a Keurig won’t pump water

Top reasons why a Keurig won’t pump water

Here are a few typical causes of your Keurig not producing water.

Limescale presence

This is most likely one of the main causes of your Keurig coffee maker’s inability to pump water or malfunction. The kind of water you use in your machine is often the cause of a water pumping issue.

When consuming tap water or fresh water from a well, keep in mind that these types of water often include high concentrations of minerals, such as calcium and magnesium, which are less prevalent in filtered or bottled water. 

This may result in a mineral accumulation in your Keurig machine’s water pipes. As these minerals accumulate, they may produce limescale, which may block your system and prevent it from dispensing water.

While limescale on its own might prevent the Keurig machine from pumping water, improper descaling can make the issue worse.

The limescale would adhere to your pump and keep accumulating if you hadn’t been descaling your machine device often or if you waited a few months before doing so.

Air in the line

Although it may seem improbable, the air in your coffee maker’s piping may prevent it from pumping water.

Therefore, if your machine has been properly maintained and still isn’t pumping water, it’s most likely due to tiny air bubbles in the water lines. Don’t worry; you can simply take it out so that it may resume pumping water.

The “more water please” misconception

Sometimes the machine still displays the “More Water Please Error” even after you have previously added the appropriate quantity of water. When you know you have added the right quantity of water but it keeps asking for more, it might be aggravating.

You may have experienced one of two events if you are seeing this error. First, the water you are using may not be the right kind, or second, the water reservoir may be giving the coffee maker incorrect instructions, which prevents the machine from pumping water.

Damaged/ Broken pumping water

The most apparent cause of no error notice when your coffee maker has been properly maintained is if your pump has physical damage.

Like any machine, with time some of its components may wear down, and it is only normal for it to entirely or partly malfunction. If you’ve had your machine micro pump for a long time and it’s not functioning, the pump is definitely broken.

Clogged entry & exit needles

You must be aware of the purpose of the Keurig machine’s needle in order to comprehend this reason why the water pump isn’t working.

The element that pierces the foil portion of the coffee pod (K-Cups) and allows hot water to pass through the device to prepare coffee is called the entrance needle.

In certain circumstances, dirt and coffee grounds jam the needles. If this occurs, the machine won’t be able to pierce through the top of the coffee pod and won’t be able to pour any water.

Misaligned Keurig machine components

One cause of your machine Vue pump not functioning might be that some of its components are out of alignment. It’s possible that you didn’t assemble the gadget properly if you recently dismantled it.

To resolve this problem and restore water pumping on your machine, make sure that all components are installed properly.

Water in the tank is below the minimum fill level

Otherwise, it can be below level. Although this is a clear-cut cause of the machine not pumping water, most people overlook this possibility in their haste to assume that their appliance is really broken.

Therefore, if the Keurig B60 pump or any model’s pump stops operating, always check to see whether there is enough water in the tank as this can be the simple solution you need.

Guide to fix a Keurig not pumping water

A solution for a machine that is still not pumping water after this modification is to place a turkey baster into the reservoir’s connection to the machine and water pump while the reservoir is still partially filled with water. To push a few spurts of water through the connection, use the turkey baster.

As the scaling and debris are pushed into the water reservoir, you should observe a little clouding of the water. After cleaning and refilling the reservoir, this should successfully unclog or descale the device, letting the pump push water through easily so that you may resume making great Keurig coffee.

If this is still ineffective, you may descale the appliance by creating a solution of vinegar and water, adding it to the water reservoir, and running the appliance. To make sure the Keurig machine is clean, you should make it a practice to do this every few months.

What if the Keurig is still not pumping?

What if the Keurig is still not pumping

Clear the water tank exit

Water from your tank must be allowed to flow freely into the device. Make sure the tank is firmly connected. If so, there can be mineral accumulation at the exit nozzle producing a blockage and stopping your Keurig from pumping water. Here’s how to diagnose the problem and clear it out:

  • Step 1: Fill up the water tank. Take off the holder for the water filter.
  • Step 2: Fill the reservoir. Use the spring to find the nozzle. Try pressing the spring down many times with anything dull, such as the eraser end of a pencil. You can rule out any problems with that item if it travels smoothly.
  • Step 3: Reinstall the tank on the device. Add two to three inches of water to it.
  • Step 4: Bring out the turkey baster. Take a little amount of water from the tank with you.
  • Step 5: Put the baster just where the water should come out of the tank – the top side of the black nozzle. Work your way around the nozzle two or three times by doing this repeatedly.

If you see any floating particles coming from the nozzle, the block was being caused by calcium buildup. To test whether the machine will pump the system and make a full cup, try running a hot water cycle into a measuring cup.

Clear a possible airlock

It’s conceivable that air got into the water tubes if you’ve ever unintentionally started a brew cycle when there wasn’t enough water in the tank. The Keurig may be unable to pump the system as a result of this clogging.

  • Step 1: About one-fourth of the tank should be filled with water.
  • Step 2: Quickly raise and lower the tank. At the reservoir’s base, near the water intake valve, you should see little air bubbles rising. Continue until no more bubbles emerge.
  • Step 3: Up to the top line, fill the water tank with water. Activate the hot water brew cycle. If water begins to flow through the machine, the problem has been resolved.

Descale to remove internal water flow blocks

If you discovered calcium accumulation in your water tank, your machine probably has it as well. The water that is used to brew your K-cups leaves behind minerals that cause limescale to build up within your brewer. Eventually, this accumulation could become significant enough to jam your machine. Your machine won’t dispense any or enough water when this occurs.

Even if you use a water filter, you should descale your plumbing every three to six months.

You should descale your brewer more often if your tap has “hard water,” which is water that includes a lot of minerals. You may purchase a cheap testing kit if you’re not sure whether your water is hard.

Keurig produces a descaling solution on its own that is compatible with all models. The non-odoring, secure composition works quickly to dissolve mineral buildup using mild citric acid. You may purchase the solution on its own or in a package with filters and rinse pods that will also aid in keeping your machine clean.

To descale your Keurig after you have the descaling solution, follow these instructions. You may need to repeat this operation at least twice if you’ve owned your machine for more than six months and have never descaled it or if your water is really hard.

Unclog the needles

There are needles inside the keurig coffee maker that create two holes in the K-cup when you brew it. As a result, hot water may finally find its way through the capsule and into your cup. Coffee grinds that get trapped around the needle may ultimately dry up and become hard. 

This is more likely to occur if you don’t get rid of your brewing pods right away. Due to the accumulation of ground coffee, your Keurig’s water flow ultimately becomes obstructed, resulting in a clogged needle and a non-functioning machine.

Use the orange cleaning tool that comes with your brewer if you have a Keurig 2.0. If you don’t have it or if you have a different model, you may clean the needles using a paper clip by doing the following:

  • Step 1: Straighten a paper clip’s point on one end.
  • Step 2: Remove the water reservoir, disconnect the brewer, and turn it off.
  • Step 3: Grab the edges of the pod holder and slowly take it away from the brewer.
  • Step 4: To detach the holder from the housing, press the button on both sides. Hold the exit needle down while turning the holder over after pulling the lever to reveal it.
  • Step 5: Insert the needle’s straight end, and then repeatedly move it in a circle. The pod holder should be washed with water and put away.
  • Step 6: The upper entry and exit needles may be seen by opening the handle and peering below. To clean, place a paper clip in each and wiggle them about.

Check the water magnet alignment

You’ll see a magnet there if you check inside your water tank. This magnet is used by your Keurig to gauge the reservoir’s water level. This magnet may over time get misaligned and trapped as a result of vibrations from the brewing process. 

The brewer will not pump water when this occurs because it is unable to determine the water level.

Gently touch the tank near the magnet housing to correct this. If nothing happens, jiggle it a bit to see if it will move. After doing this, if it is still stuck, drain any remaining water from the tank, give it a light cleaning with soap, and then refill it with water. 

If cleaning doesn’t help and you still can’t get the tank to move, you’ll probably need to buy a new one.


Can I replace the pump with a Keurig?

Answer: You can, although some individuals may find it challenging. However, if you are familiar with tools, you may be able to replace them without too much difficulty.

How much is a Keurig pump?

Answer: The cost of the new pump varies according to the coffee machine model you own. You may often be better off just buying a new coffee maker.

Keurig makes noise when drawing water

Answer: Your coffee maker will often produce noise when making coffee, even while pulling water. However, if it’s noisier than normal, it may be blocked with mineral deposits, the device might be malfunctioning, or you might need a replacement if you’re using an earlier coffee maker model.


Via this “Keurig not pumping water” article, we can see Keurig coffee machines are practical, particularly if you drink a lot of coffee, and they may help you obtain your daily dosage of caffeine.

However, it may have technical problems, such as a broken water pump, just like any other equipment. Hopefully, the solutions listed above will cure the issue with your appliance so you may keep sipping on your preferred cup of coffee.

If you’re still having trouble, get in touch with coffee maker customer support, who can provide thorough guidance on all varieties of coffee maker machines.

Here are a few common problems and simple solutions that CentralParkwestcafe has learned and provided for you.

Scores: 4.2 (72 votes)